Hdmi (High Definition Multimedia Interface) Connector; To Select Connected Devices - Magnavox 30MF200V User Manual

HDMI (High Definition Multimedia Interface) connector

AV3
L
AUDIO
HDMI
R
Connect the digital HDMI output of your HD device (e.g. DVD player, Set Top Box..) to the
connector of your TV.
Notes:
- Proper working is only guaranteed with HDMI compliant consumer products.
- Digital devices from different manufacturers have the possibility of differing output standards which may cause
difficulties for the television to properly display;
- If the set is cold, there may be a small "flicker" when the set is turned on. This is normal, there is nothing wrong
with the set.

To select connected devices

7 8
AV+
0
AV+
ACTIVE
SAP CONTROL TIMER
AUTO
M
9
According to where you connected the accessory devices, press
•
-
AV+
•
AV+
SLEEP
•
PIP AV+
AUTO to the rear or to the side (according to the type of TV you've
a
purchased), see p. 6
•
AV+
connected to
•
AV+
connected to
•
AV+
AV3
Note: When in HD or PC mode, first press the
HDMI is the leading new standard for Digital High
Definition video and audio interconnection. Eg. with a Digital
Set top box, with HDMI-equipped devices like a DVD-R, AV
receiver...
Note: The HDMI connector does
analogue audio.
The connector allows
HDMI
- the following TV and monitor display modes:
EDTV 640/720 x 480p
720 x 576p
HDTV 1920 x1080i
VGA 640 x 480
SVGA 800 x 600
XGA 1024 x 768
- uncompressed HD content
- encrypted or non encrypted signals.
followed by digit '
followed by digit '
followed by digit '
followed by digit '
, see p. 8
AV3
followed by digit '
, see p. 9
AV3
followed by digit '
, see p. 8
mode or to select ,
AV1
support DVI devices with
NOT
60 Hz
60 Hz
60 Hz
' to select
1 AV1
' to select
2 AV2
' to select for a device connected
3 REAR
' to select for a HD-A device
4 HD-A
' again to select
4 HD-D
' to select for a PC connected to
5 PC-A
TV
or again.
AV2 REAR
HDMI
for a HD-D device
button to return to TV
9