Box Contents; Operating Conditions Of The Cc Debugger - Texas Instruments SWRU197F User Manual

3

Box Contents


1 x CC Debugger

1 x USB-A to Mini-B USB cable

1 x 10-pin flat cable with 2x5 2.54 mm connector

1 x 10-pin flat cable with 2x5 1.27 mm connector

1 x Converter board 2.54 mm – 1.27 mm connector

Documentation
4

Operating Conditions of the CC Debugger

Minimum target voltage:
Maximum target voltage:
Operating temperature:
Regulated voltage on CC Debugger:
Maximum target current (*):
Supported Operating Systems:
(*) Only applicable if the target is powered from the CC Debugger
Figure 1 - CC Debugger connected to a SoC Battery Board with a CC2530EM
1.2 Volt
3.6 Volt
0C to 85C
3.3 Volt
200 mA (*)
Microsoft® Windows® 2000
Windows XP SP2/SP3 (32 bit versions)
Windows Vista®
Windows 7
4/23
(32 & 64 bit)
(32 & 64 bit)
SWRU197F
June 2013