Apple Carplay; Using Apple Carplay; Setting The Driving Position; Starting Procedure - Pioneer AVH-Z5190BT Owner's Manual

Monitor rds av receiver
Table of Contents

Advertisement

Apple CarPlay

You can operate iPhone applications with finger gestures such as tapping, dragging,
scrolling, or flicking on the screen of this product.
Compatible iPhone models
iPhone 7, iPhone 7 Plus, iPhone SE, iPhone 6s, iPhone 6s Plus, iPhone 6, iPhone 6 Plus,
iPhone 5s, iPhone 5c, iPhone 5
NOTE
The compatible finger gestures vary depending on the application for the iPhone.
WARNING
Certain uses of the iPhone may not be legal while driving in your jurisdiction, so you must be aware of
and obey any such restrictions. If in doubt as to a particular function, only perform it while the car is
parked. No feature should be used unless it is safe to do so under the driving conditions you are
experiencing.

Using Apple CarPlay

Important
Apple CarPlay may not be available in your country or region.
For details about Apple CarPlay, visit the following site:
http://www.apple.com/ios/carplay
• The content and functionality of the supported applications are the responsibility of the App
providers.
• In Apple CarPlay, usage is limited while driving, with availability of functions and content determined
by the App providers.
• Apple CarPlay allows access to applications other than those listed that are subject to limitations
while driving.
• PIONEER IS NOT RESPONSIBLE AND DISCLAIMS LIABILITY FOR THIRD PARTY (NON-PIONEER) APPS
AND CONTENT, INCLUDING WITHOUT LIMITATION ANY INACCURACIES OR INCOMPLETE
INFORMATION.

Setting the driving position

To achieve optimum usability of Apple CarPlay, set the driving position setting correctly
according to the vehicle. The setting will be applied the next time an Apple CarPlay
compatible device is connected to this product.
1
Press
.
2
Touch
then
.
The system setting screen appears.
44
En
3
Touch [Driving Position].
4
Touch the item.
[Left]
Select for a left-hand drive vehicle.
[Right]
Select for a right-hand drive vehicle.

Starting procedure

1
Connect an Apple CarPlay compatible device to this product via USB.
2
Press
.
3
Touch
.
4
Touch [Apple CarPlay].
5
Touch Apple CarPlay icon in the tab.
The application screen appears.
TIP
You can use Siri function by pressing
once Apple CarPlay is activated.
NOTES
• If an Apple CarPlay compatible device has been connected and another screen is displayed, touch
[Apple CarPlay] on the top menu screen to display the Application menu screen.
• The Bluetooth connection with the Apple CarPlay compatible device will be terminated automatically
if Apple CarPlay is turned on. While Apple CarPlay is turned on, only a Bluetooth audio connection will
be possible for devices other than the device connected via Apple CarPlay.
• Hands-free phoning via Bluetooth wireless technology is not available while Apple CarPlay is on. If
Apple CarPlay is turned on during a call on a mobile phone other than an Apple CarPlay compatible
device, the Bluetooth connection will be terminated after the call ends.
• Refer to iPod/iPhone with Lightning connector (page 51) for details on connecting a device to this
product.

Adjusting the volume

You can adjust the guidance volume separately from the main sound volume when
Apple CarPlay is used.
1
While Apple CarPlay is activated, press VOL (+/-).
The volume menu will be displayed on the screen.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Avh-z2190bt

Table of Contents