Table of Contents
Advertisement
GETTING STARTED
3
Insert the blower tube handle into the bellow.
7
Install the battery pack into the product.
4
3
4
1
2
Place the upper and lower clips over the front and rear
locking positions of the bellow. Insert and turn the screws
into the clips to secure the bellow in place.
8
Press the trigger to start the product. Lower the cruise
control level to select between low or high speed mode,
then lock the trigger in place.
GETTING STARTED
5
1
Turn the handle adjusting knob below the trigger mechanism counterclockwise to loosen the trigger assembly. Move the
trigger assembly forward or backward to a suitable position. Turn the handle adjusting knob clockwise to lock the trigger
assembly in place.
Hold the blower with the handle in your right hand, and let
the air stream work close to the ground.
2
3
9
Advertisement
Table of Contents
