Product Name: Colour Changing Ceiling Ring
Specification
Size: Large Round Light 100cm x 10cm 3.32kg
Medium Round Light 39.5cm x 10cm 1.24kg
Chain Length 88cm
All sizes and weight are approximate
Material: PE
LED: non – replaceable multi coloured LEDs
Tools required:
Cross head screwdriver
Drill
Expansion screws and fixings for ceiling mount
WARNING!
Contains sequences of flashing lights which may affect individuals who are susceptible to photosensitive epilepsy or other photosensitivities.
This product is not a toy. Use under adult supervision
Safety Warnings:
•
Before setting up your light, ensure the product is not damaged. If any part of the product is damaged, do not attempt to assemble and use.
•
Do not attempt to hardwire this product to the mains electrical supply. This product does not require to be connected to your mains electrical supply. It operates
using an adaptor power supply.
•
Only use the adaptor supplied with this product and no other adaptor must be used.
•
This product contains non-replaceable LEDs. If any of the LEDs cease functioning, the whole unit must be disposed of according to your local council gu idelines.
•
This is not a toy, keep away from children and pets during assembly.
•
Do not operate in packaging
•
Keep away from heat sources or naked flame
•
Ensure cable is placed such that no trip, entanglement or strangulations hazards are likely to occur
Instructions
•
Before you start, please read these instructions carefully and retain for future reference. Check the contents inside the pac kaging and ensure you have all the
required parts listed and there are no missing parts. If any parts are missing DO NOT attempt to assemble the product.
•
Carefully remove the product from the packaging taking care not to twist or tangle the cable.
•
As this light is not required to be hardwired, an adaptor is connected, therefore ensure a plug socket is within reachable distance, without stretching the wire too
much.
•
Remove the 2 screws, caps and bolt from the fixing bracket. Use the fixing bracket as a template to mark the screw holes on the ceiling. Insert the 2 screws
supplied back in the bracket. Using correct expansion screws and fixings (not supplied with this product) mount the bracket on to the ceiling.
•
Lay down the round pendant light on a flat surface. There are 4 tiny pre-made holes around the light. On each hole screw the eye screw attached to the chain in
the hole. This can be done by hand.
•
Once all 4 hanging chains have been securely screwed to the round pendant light, attach the other end of the hanging chain to the hooks provided on the metal
ceiling canopy. The metal chains are linked so that overall length/drop of the pendant light can be adjusted to your requirem ents. Please do this before fixing the
metal ceiling canopy to the bracket.
•
Attach the power adaptor to the pin connection on the pendant light.
•
Fix the ceiling base canopy to the fixed bracket using two nuts provided, then put the screw cap on.
•
Plug the adaptor to the mains and switch on.
Remote Control Functions
Battery Warnings! Batteries should only be inserted or changed by an adult. Non-rechargeable batteries are not to be recharged. Be sure to insert batteries with the correct
polarities and always follow the product and battery manufacturers' instructions. Remove batteries from product before extend ed storage. Always remove old or exhausted
batteries from the product. The supply terminals are not to be short circuited. Check that the contact surfaces are clean and bright before installing batteries. Do not bury or
burn batteries. Recycle used batteries responsibly. Do not dispose of in household waste.
Disposal: The "Crossed Wheelie Bin" symbol on the product means that the product is classed as Electrical or Electronic equipment and s hould not be
disposed with other household or commercial waste at the end of its useful life. The goods must be disposed of accord ing to your local council guidelines.
Please retain this information for future reference.
On/Off
Increse/ Decrease speed of
motion
-Select previous sequence
+ Select next sequence
Switches light to automatic
motion
Supplied By: Playlearn Ltd, 41 Ramsgate Street, Salford, M7 2YL. UK
Tel:0161 737 5099 Website:
www.play-learn.co.uk
Product Code: CCCRL & CCCRM
Contents:
1 x Round LED Pendant Light
4 x linked chain with screw eye
1 x ceiling bracket attached to the ceiling metal canopy
1 x power adaptor
1 x Remote Control (CR2025 Lithium battery included)
Help &
Support: Sales@play-learn.co.uk
Page 1 of 7
Increase/Decrease brightness
Mode lock (Press and hold for 5
seconds)
Colour adjustment (press and hold
for 5 seconds)
Constant light colour
Need help?
Do you have a question about the CCCRL and is the answer not in the manual?
Questions and answers