Sony WEGA KV-28FQ86K Operating Instructions Manual page 13

Auto Volume Press
If you select "Dolby Virtual" on the "Sound Effect" option, the "Auto Volume" option will
automatically be switched to "Off" and vice versa.
TV Speakers This option allows you to choose if you want to listen to the TV sound from the
If you have selected "One time off" or "Permanent off", the volume of the external equipment
can also be altered by pressing the 2 +/- buttons of the remote control. When the volume
buttons are pressed, the symbol
not the volume of the TV set speakers, it is from the external equipment.
Headphones Set Up
OK
MENU
RM-945
* The "BBE High Definition Sound system" is manufactured by Sony Corporation under
license from BBE Sound, Inc. It is covered by U.S. Patent No. 4,638,258 and No.
4,482,866. The word "BBE" and BBE Symbol are trademarks of BBE Sound, Inc.
**This TV has been designed to create surround sound effect by simulating the sound of four
speakers with two speakers, when the broadcast audio signal is Dolby Surround encoded.
The sound effect can also be improved by connecting a suitable external amplifier (for
details refer to page 23).
** Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol
are trademarks of Dolby Laboratories.
v V
or to select On (the volume level of the channels will stay the same,
independent of the broadcast signal, e.g. in the case of advertisements) or Off (the
volume level changes according to the broadcast signal). Next press OK to store.
TV speakers or from an external amplifier connected to the audio outputs on the
rear of the TV.After selecting this option, press OK. Next press
repeatedly to select:
On (to listen the TV from the TV set speakers).
One time off (to listen to the TV from the external amplifier only one
time. By using this option, any time the TV is turned
off/on, it returns to the default setting "On").
Permanent off (to always listen to the TV from external amplifier).
Once you have selected your desired option, press OK to store.
%
will appear indicating that the volume you are altering is
This option allows you to customise the headphones volume and the
PAP settings (refer to page 19 for details on PAP).
After selecting this option press OK. Next press
to select:
Volume
Dual Sound
PAP Sound
B b
Press or to decrease or increase the volume level
from the headphones.
• For a Stereo broadcast:
v V
Press or to select Stereo or Mono
• For a bilingual broadcast:
v V
Press or to select mono (for mono channel if
available), A (for channel 1) or B (for channel 2).
Select Frame if you want to listen to the active screen
(framed) of the PAP screen (see page 19), select Left
picture if you want to listen to the left screen or select
Right picture if you want to listen to the right screen.
v V
or
v V
or repeatedly
13
TV Functions
GB