Related Manuals for Parmco FS 600-GAS GAS
Summary of Contents for Parmco FS 600-GAS GAS
- Page 1 Installation and Operating Instructions Model: FS 600-GAS GAS For your convenience, we recommend to attach the serial number label HERE. 727626092017...
- Page 2 • Normal or scheduled maintenance including blocked filters or ducting. Please retain this Warranty card together with receipt or other proof of purchase date when seeking service during the warranty period • Consumable items such as light bulbs. • Any damage to hobs caused by spills when cooking. • Any breakage or damage of glass items. • Any damage caused by non recommended product used for cleaning, Please contact Parmco at 09 573 5678 if your maintaining, lubricating or similar. appliance needs servicing under warranty. Please • Any aspect relating to the installation of the product, or damage caused have your model number and proof of purchase ready. during installation including blocked access for repair. Warranty repairs must be authorized by Parmco. • Any third party (including reseller) or consequential loss or damage (direct or indirect) however arising. Subject to updates without prior notice, please visit www.parmco.co.nz for E & O.E. 727626032017 the latest version.
- Page 3 Dear Valued Customer, Thank you and congratulations on purchasing your new Parmco appliance. All Parmco products are made to the highest quality and design standards. We are sure you will enjoy your new appliance. As a note, please read through these instructions carefully. These will assist you in gaining a complete understanding of the functions and features o ered by your appliance.
-
Page 4: Table Of Contents
CONTENTS Instructions for use ..........................2 Instructions for disposal .......................... 3 Installing the appliance ..........................4 Adaptation to different types of gas ......................6 Final operations ............................9 Control panel ............................10 Using the cooking hob ........................... 10 Using the oven ............................12 Accessories............................. -
Page 5: Instructions For Use
1. INSTRUCTIONS FOR USE This manual is an integral part of the appliance and therefore, it must be kept in its entirety and in an accessible place for the whole working life of the cooker. We advise reading this manual and all the instructions therein carefully before using the cooker. -
Page 6: Instructions For Disposal
2. INSTRUCTIONS FOR DISPOSAL Our household appliances are packaged using only non-pollutant, environmental-friendly, recyclable materials. Please help by disposing of the packaging correctly. Find the correct address of collection, recycling and disposal centres from your local organizations. Never leave all or part of the packaging lying around. Your old appliance also needs to be disposed of correctly. -
Page 7: Installing The Appliance
150mm from the side of the appliance, as shown in the drawing below. Any wall cupboards or shelves must be at a distance of at least 750mm above the work surface. FS 600-GAS GAS The cooker is supplied with an anti-tilting chain to prevent the appliance from tilting forward and any accidental damages to the gas pipe. - Page 8 3.1 Electrical connection Make sure that the voltage and the cross-section of the power supply line match the specifications indicated on the identification plate positioned on the back panel. Do not remove this plate for any reason. If the appliance is connected to the power supply network by a fixed connection, install a multipolar cut-out device on the power supply line with a contact opening distance equal to or greater then 3mm near the appliance and in an easily reachable position.
-
Page 9: Adaptation To Different Types Of Gas
3.4 Connection to gas Installation of the rubber steel hose must be carried out so that the steel hose length is no greater than 1.5 m. Make sure that the steel hose is not squashed and will not come into contact with moving parts. Verify that all the following conditions are met: ... - Page 10 4.1 Replacement of nozzles on the cooking hob 1. Remove the pan stands, as well as all the caps and flame-spreader crowns. 2. Unscrew the burner nozzles with a 7mm socket wrench. 3. Replace the burner nozzles according to the type of gas to be used (see section 4.2 Burner and nozzle characteristics table).
- Page 11 4.3 Arrangement of the burners on the cooking hob FS 600-GAS GAS model BURNERS 1. Semi rapid 2. Auxiliary 3. Triple ring (wok) 4.4 Oven burner adjustment To adjust the oven burner, open the oven door, remove the oven base and its rack, then lift up the oven surface and pull it outwards.
-
Page 12: Final Operations
5. FINAL OPERATIONS After replacing the nozzles, reposition the flame-spreader crowns, the burner caps and the pan stands. Following the adjustment to a new type of gas, replace the gas adjustment label fixed to the appliance with the one corresponding to the new gas. The label is inserted in the pack together with the nozzles. -
Page 13: Control Panel
6. CONTROL PANEL All the cooker controls are on the front panel. FS 600-GAS GAS Hob burners control knob To light the flame, press the knob and turn it counter-clockwise to the minimum flame symbol. To adjust the flame, turn the knob to the zone between the maximum and minimum setting. - Page 14 The burner controlled by each knob is shown above the knob. The appliance is equipped with an electronic ignition device. Simply press the knob and turn it counter-clockwise to the maximum flame symbol until it lights. If it does not light in the first 15 seconds, switch the knob to the off position and wait at least 60 seconds before trying to light it again.
-
Page 15: Using The Oven
15 seconds, stop the attempt to light it, open the door completely, and wait at least 60 seconds before trying to light it again. Manual ignition for FS 600-GAS GAS model only Open the oven fully and turn the thermostat knob, keeping it pressed. - Page 16 To use the rotisserie for the FS 600-GAS GAS model, place the rotisserie shelf “B” on the second pair of runners from the bottom and fit the rod “A” into the hole in the back of the oven.
-
Page 17: Accessories
During oven cooking operations, place the baking tray provided on the bottom shelf position to prevent any spillages from dripping onto the bottom of the oven. When using the oven, remove all unused plates and racks from its interior. Do not cover the bottom of the oven with aluminium or tin foil, and do not place pans or oven plates on it as this may damage the enamel coating. - Page 18 10.2 Cleaning the parts of the cooking hob Pan stands Remove the pan stands, cleaning them with warm water and non-abrasive detergent. Make sure to remove any encrustataion. Replace them on the cooking hob. Contact between the pan stands and the flame can cause modifications to the enamel over time on those parts exposed to heat.
-
Page 19: Additional Maintenance
10.4 Cleaning the glass door The glass on the door should always be kept thoroughly clean. Use an absorbent kitchen roll. For stubborn dirt, use a damp sponge and standard detergent. 11. ADDITIONAL MAINTENANCE The oven may require extraordinary maintenance or replacement of parts subjected to wear, such as seals, bulbs, etc. - Page 20 11.4 Removing the door seal To allow thorough cleaning of the oven, the seal may be removed. Before removing the seal, remove the door as described above. Once the door has been removed, lift the tabs at the corners as shown in the figure.