Kogan SMARTERHOME KASMSLRPNLA User Manual page 5

3. Using a drill, secure the base with M5 30mm screws.
4. Secure the spinlock collar into the stand, then screw the nut onto the stand.
Spinlock collar
5. Screw the stand onto the back of the solar panel. Tighten the nut firmly.
6. Secure the spinlock collar into the base, then angle the joint on the stand upwards. It
is recommended to angle the solar panel 30° upwards.
7. Connect the Micro-USB cable from the solar panel to the Micro-USB port on the
camera to charge.
Stand
Solar panel
Stand
30°
Spinlock collar
Nut
Joint on the stand
Base
Nut