Advertisement
INSTALLATION
Location
• Place the solar panel in an area with consistent sunlight. The panel needs at least a
few hours of sunlight per day to keep the camera's battery charged.
• For optimum results, ensure the solar panel is facing north
Note:
The amount of energy produced by the panel can vary based on weather conditions,
seasonal changes, geographic location, and other factors.
If installing on drywall, plaster, or timber walls
1. Using a stud finder (not supplied), locate a safe and secure mounting location for the
panel.
2. Place the base against the walls and mark the locations of the holes.
3. Using a drill, drill the holes and then secure the base in place using M5 30mm screws.
If installing on concrete or masonry walls
1. Place the base against the wall and mark the locations of the holes on the base.
Using a drill, drill holes at the marked locations.
2. Insert the wall anchors into the drilled holes. then place the base against the wall
anchors.
Base
M5 30mm screws
7.5 x 24.5mm wall anchors
M5 30mm screws
Wall
Base
Wall
Advertisement
