Advertisement
Quick Links
!
WARNING!
This product contains small parts
that can be a choking hazard. Do
not let children play with any of
these small parts! Keep children
away from the work area during
installation.
!
Caution
This product is intended to
be installed by professional
installation contractors, or
persons familiar with the tools
and methods required for this
installation. If you are not sure
about your ability to perform this
installation, you must contact a
professional. MantelMount is not
responsible for damage or injury
caused by incorrect installation or
improper use.
!
Caution
Do not let children operate, pull
on, or hang from MantelMount. Do
not let children push MantelMount
upward to the top position - this
will cause the mount to slam
against the wall due to the upward
force of the springs. Only a person
tall enough to control the mount
all the way to the top should
operate MantelMount.
!
Caution
Do not use this product in any
way, or for any purpose, that is
not specifically described in these
instructions. MantelMount is not
responsible for damage or injury
caused by incorrect installation or
improper use.
NOTES:
A. This kit requires some parts
and instruction steps from a
MantelMount TV mount.
B. Any part numbers that are
referenced in these instructions
that are lower than {80} are
parts that come from the
MantelMount Mount.
C. Most installations will not use
all of the parts in this kit.
NOTE: If installing above a Mantel, add an additional 1.5 inches of clearance to the Minimum Height Chart
measurement found in your MantelMount installation guide.
Installation Instructions
SBK00 Soundbar Adapter Kit
If you need help, call 1.800.897.9755 ext.1
For missing/damaged parts or questions during installation, please
contact our Customer Support team at 1.800.897.9755 ext.1 or
support@mantelmount.com. Customer satisfaction is our highest priority!
Watch an installation video or access a PDF of this manual at
MantelMount.com/FAQs/Specs and Manuals.
Contains important safety information – please save! MantelMount.com
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for MantelMount SBK00
Summary of Contents for MantelMount SBK00
- Page 1 MantelMount.com/FAQs/Specs and Manuals. Contains important safety information – please save! MantelMount.com NOTE: If installing above a Mantel, add an additional 1.5 inches of clearance to the Minimum Height Chart measurement found in your MantelMount installation guide.
-
Page 2: Before Installation
Before you begin, please verify that all components are included and undamaged. If any parts are missing or damaged, contact MantelMount. Never proceed with missing or damaged parts! Lay out all components and make sure you identify that each one has a match in the diagram. Some of the parts included will not be used during installation. - Page 3 Rotates to reach holes in the back of a {82} not have available screw holes. soundbar that are high, low, or wide. {90} Use the hardware provided by your soundbar manufacturer to secure your soundbar to cradle or wings. Customer Support 1.800.897.9755 x1 support@mantelmount.com...
- Page 4 If installing above a Mantel, add an additional 1.5 inches of clearance to the Minimum Height Chart measurement found in your MantelMount installation guide. The SBK00 is designed to be used with all models of the MantelMount. Review the following images and choose your setup for the correct installation configuration diagram.
- Page 5 BEFORE INSTALLATION Determine your Soundbar requirements The SBK00 was engineered to be used with various makes and models of soundbar. The following information will help you determine which configuration will work best for your soundbar mounting situation. Soundbar with Holes on the Bottom...
- Page 6 Brace Extenders need to be inserted into the Vertical Braces the opposite as stated in the Manual for the MantelMount. A washer will have to be installed between the extender and TV to fill the gap. Long or Short Adjust Bracket can be attached to the Brace Extender or through both Vertical Brace and Brace Extender.
-
Page 7: Front View
3in (75mm) Soundbar to Max Depth to The Maximum Depth to make the soundbar flush with the make flush front of mount front of the TV depends on the Thickness of the TV. with TV Customer Support 1.800.897.9755 x1 support@mantelmount.com... - Page 8 Optional Mounting: Tall Soundbar Note in this image that the Soundbar Wings are rotated upward and attached to the holes in a tall soundbar in order to allow the MantelMount Handle to reach down below the soundbar. SBK00 Installation Instructions...
- Page 9 L-Brackets. All other mounts have a Horizontal Brace for mounting. {87} {88} {93} {91} {87} * Use the hardware provided by your soundbar manufacturer to secure your soundbar to cradle or wings. Customer Support 1.800.897.9755 x1 support@mantelmount.com...
- Page 10 Since the recess box is closer to the wall, the Long Depth Support can NOT be used with a recess box. Only the Short Depth support is used. If using the Horizontal Recess Brace with the Recess Box, the SBK00 Soundbar Kit will not work.
- Page 11 SBK00 RECESS BOX INSTALLATION {87} {93} {87} {93} {86} {86} Use the hardware provided by your soundbar manufacturer to secure your soundbar to cradle or wings. 1. Attach Short Depth Adjust (blue) to TV {88} Brace Extender 2. Connect to the Vertical Brace with the M6 3.
- Page 12 For missing/damaged parts or questions during installation, please contact our Customer Support team at 1.800.897.9755 ext.1 or support@mantelmount.com. Customer satisfaction is our highest priority! Learn more about our patented MantelMount products at: mantelmount.com/pages/patents MAILING ADDRESS: 2647 Gateway Road Ste. 105-435 Carlsbad, CA 92009 mantelmount.com ©...
Need help?
Do you have a question about the SBK00 and is the answer not in the manual?
Questions and answers