Important Safety Information - Audiolab 6000 Series User Instructions

Important Safety
Getting Started Controls and Connectors Remote Handset Connections Operation Warranty Coverage Specifications
Information

1 : Important Safety Information

AVIS: RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR
WARNING: SHOCK HAZARD-DO NOT OPEN
This lightning flash with arrowhead symbol within an
equilateral triangle is intended to alert the user to
the presence of non-insulated "dangerous voltage"
within the product's enclosure that may be of sufficient
magnitude to constitute a risk of electric shock.
Warning: To reduce the risk of electric shock, do
not remove cover (or back) as there are no user-
serviceable parts inside. Refer servicing to qualified
personnel.
The exclamation point within an equilateral triangle
is intended to alert the user to the presence of
important operating and maintenance instructions in
the literature accompanying the appliance.
IMPORTANT SAFETY INFORMATION
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in
accordance with the manufacturer's instructions.
Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with
one wider than the other. A grounding plug has two
blades and a third grounding prong. The wide blade
or the third prong is provided for your safety. If the
provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or
pinched particularly at the plugs, convenience
receptacles, and at the point where they exit from the
apparatus.
Use only with the cart, stand, tripod,
b r a c k e t , o r t a b l e s p e c i f i e d b y t h e
manufacturer, or sold with the apparatus.
When a cart or rack is used, use caution
w h e n m o v i n g t h e c a r t / a p p a r a t u s
combination to avoid injury from tip-over.
Unplug this apparatus during lightning storms or when
unused for long periods of time.
Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate
normally, or has been dropped.
CAUTION: These servicing instructions are for use by
qualified service personnel only. To reduce the risk of
electric shock, do not perform any servicing other than
that contained in the operating instructions unless you
are qualified to do so.
Do not install this equipment in a confined or built-in
space such as a bookcase or similar unit, and keep well
ventilated in open space. The ventilation should not
be impeded by covering the ventilation openings with
items such as newspaper, table-cloths, curtains etc.
WARNING: Only use attachments/accessories
specified or provided by the manufacturer (such as the
exclusive supply adapter, etc).
Page 1
WARNING: Please refer to the information on the
exterior panel of the enclosure for electrical and
safety information before installing or operating the
apparatus.
CAUTION: Danger of explosion if battery is incorrectly
replaced. Replace only with the same or equivalent
type.
WARNING: For the terminals marked with symbol of "
" may be of sufficient magnitude to constitute a risk
of electric shock. The external wiring connected to the
terminals requires installation by an instructed person
or the used of ready-made leads or cords.
Mains Supply: The mains operating voltage of
Audiolab 6000 series units is shown on the rear panel.
If this voltage does not match the mains voltage in your
area, consult your Audiolab dealer about converting
the unit.
The mains supply fuse on the rear panel is accessible
when the IEC mains plug has been removed. In the
rare event that it has broken, check for any obvious
cause before replacing the fuse with one of the correct
rating and type.
The fuse values are:
220 – 240V (UK, China, etc.) T2.0AL 250V Slow Blow
100 – 120V (USA, Japan, etc.) T4.0AL 250V Slow Blow