NOTE:
The palm-rest and keyboard assembly consists of the following components:
● Palm rest
● Keyboard
● Wireless antenna (2)
Next steps
1. Install the
touchpad
2. Install the
power button with optional fingerprint
3. Install the
power-button
4. Install the
power-adapter
5. Install the
system board
NOTE:
The system board can be removed and installed with the M.2 solid-state drive, memory module, and heat sink
attached.
6. Install the
speakers
(tweeters).
7. Install the
speakers
(woofers).
8. Install the
display
assembly.
9. Install the
left fan
and the
10. Install the battery.
11. Install the
wireless
card.
12. Install the
base
cover.
13. Follow the procedure in
84
Removing and installing Field Replaceable Units (FRUs)
board.
port.
right
fan.
After working inside your
reader.
computer.