Mitsubishi Electric MFZ-KT25VG-E1 Service Manual page 39

How to remove the multi-flow
vane and the horizontal vanes
(1) Removing the horizontal vane (front/back)
(1)-1. See the figure below and push to open the indicated
places on the horizontal vanes (between front and back)
with your fingers so that you can access 4 vane shafts
positioned on the back of the horizontal vanes.
(vane shafts on each horizontal vane)
(1)-2. Insert a tool such as a precision screwdriver
in the opening on the vane shaft and lift the catch
of the vane shaft in arrow 1 direction to detach it
from the rib on the horizontal vane. Slide the vane shaft
in arrow 2 direction and separate it from the unit body.
Unit body
Vane shaft
(1)-3. Remove the axial rods on the both ends of the
horizontal vane from the unit body.
OBH843A
Unit body
Vane shafts
Opening
Rib
Catch
Horizontal vane
Horizontal vane (back)
Multi-flow vane
(2) Removing the multi-flow vane
(2)-1.Open the horizontal vanes (front and back) by following (1)-1.
Make sure that 3 vane shafts are on the back of the multi-flow vane.
Top down view from the back of the unit
(2)-2. Insert a tool such as a precision screwdriver in the gap
between multi-flow vane and the vane shaft and lift the catch
of the vane shaft in the arrow 1 direction to detach it from the rib
on the multi-flow vane. Slide the vane shaft in arrow 2 direction
and separate it from the unit body.
Catch
Rib
Vane shaft
Multi-flow vane
(2)-3. Remove the axial rod on the one end of the multi-flow
vane from the unit body.
39
Horizontal vane (front)
Vane shafts
Multi-flow vane
Unit body