Timer Programming - JVC LT-32C670 Instruction Manual

Using the Features
5

Timer Programming

This function is used to perform scheduled recordings or timers (will switch the programme on when it starts).
The recording from timers or direct recording may have a little bit of delay when it starts to record the broadcast programme.
Please make sure the USB device is inserted. If not, a warning message will pop up.
1. Press the MENU button then press the
press OK.
2. Press the
3. Press the YELLOW button to add a timer. The ADD TIMER menu will be
displayed.
4. Adding the timer
Press the
Timer Type
Channel
Record Type
Date
Start
End
Duration
Repeat
Change/Delete
Playback
30
JVC 32' LED Smart HD TV LT-32C670/671(B) Manual.indd 30
buttons to select SETTINGS and
to highlight TIMERS then press OK.
to select each setting below.
Press the buttons to select RECORD or TIMER.
RECORD - Will record a programme
TIMER - Will automatically switch to the selected
programme when it starts.
Press the buttons to select the channel.
Not adjustable.
Press the buttons and the NUMBER buttons to
set the date.
Press the buttons and the NUMBER buttons to
set the start time.
Press the buttons and the NUMBER buttons to
set the end time.
Set automatically.
Press the buttons to set the recording to record
ONCE - DAILY - WEEKLY or just WEEKDAYS.
Press the buttons to select ALLOWED or
DISALLOWED
ALLOWED - You allow anyone to change or delete the
recording.
DISALLOWED - You will have to enter the PIN code to
change or delete the recording.
Press the buttons to select USE PARENTAL
SETTINGS, DISALLOWED or ALLOWED. You will
need to enter the PIN number if you want to play a
recording when you select 'use parental settings and
disallowed' .
• When the preset time is reached, the
TV will start recording automatically.
• If a programme recording starts
when the TV is in standby mode, the
LED indicator will flash.
11/09/2018 10:19