Samsung MIM-E03CN Installation Manual page 7

Wired Remote Controller Installation
1. Insert the flat-head screwdriver into two square grooves at the bottom of the Wired Remote Controller and rotate it to lift
the front cover for removal from the rear cover.
2. Arrange the power cable and the communication cable so that they fit in the housing along the edges of the rear cover.
8 cm 8 cm
Area A
<When the cable is not concealed>
<When the cable is concealed>
• When connecting the power and communication cables to the bottom of the Wired Remote Controller, first cut
off the area A.
NOTE
7