Page 1
SSEP 18 LTX BL MVT de Originalbetriebsanleitung 5 Alkuperäiset ohjeet 37 en Original instructions 9 no Original bruksanvisning 41 Notice originale 13 da Original brugsanvisning 45 Oorspronkelijke gebruiksaanwijzing 17 Instrukcja oryginalna 49 Istruzioni originali 21 Πρωτότυπο οδηγιών χρήσης 53 es Manual original 25 hu Eredeti használati utasítás 58...
Page 3
15,0 / 1,5 h,WB h,WB *2) 2014/30/EU, 2006/42/EC, 2011/65/EU *3) EN 62841-1:2015, EN 62841-2-11:2016, EN IEC 63000:2018 2021-08-10, Bernd Fleischmann Direktor Produktentstehung & Qualität (Vice President Product Engineering & Quality) *4) Metabowerke GmbH - Metabo-Allee 1 - 72622 Nuertingen, Germany...
Page 4
ASC 145, ASC 55 etc. 18 V 10,0 Ah 6.25549 LiHD 18 V 18 V 8,0 Ah 6.25369 LiHD 18 V 18 V 5,5 Ah 6.25368 LiHD 18 V 18 V etc.
Page 5
ENGLISH en Original instructions Use clamps or another practical way to secure 1. Conformity Declaration and support the workpiece to a stable platform. Holding the work by your hand or against the body We declare under our sole responsibility: These leaves it unstable and may lead to loss of control.
Page 6
Do not let Instructions on charging the battery pack can be dust enter the body. found in the operating instructions of the Metabo Observe the relevant guidelines and national charger. regulations for your material, staff, application and place of application (e.g.
Page 7
ENGLISH en Occasionally shift the guide (2) to achieve even Plunge cuts: wear of the saw blade. Plunge cuts may only be made in soft materials such as wood or plastic. Only use short saw blades. 1. Swivel the lever (1) downwards and shift the guide (2) to the desired position.
Page 8
= Weight (with smallest battery pack) 10. Accessories Measured values determined in conformity with EN 62841. Use only original Metabo or CAS (Cordless Alliance Permitted ambient temperature during operation: System) battery packs and accessories. -20 °C (-4°F) to 50 °C (120°F) (limited performance See page 4.
Need help?
Do you have a question about the SSEP 18 LTX BL MVT and is the answer not in the manual?
Questions and answers