Safety Information - Faber FBF PH 1020 User Manual

EN

1. SAFETY INFORMATION

For your own safety and
correct operation of the
appliance, please read
this manual carefully be-
fore installation and oper-
ation. Always keep these
instructions together with
the appliance, even if it is
sold or transferred to third
parties. It is important that
users are familiar with all
the appliance's operating
and safety characteristics.
Connection of the wiring
must be performed by a
specialist technician.
• The manufacturer cannot be
held responsible for any dam-
age resulting from incorrect or
inadequate installation.
• The cut-out devices must be
installed in the fixed system
according to the wiring sys-
tem regulations.
• For Class I appliances, check
that the domestic power sup-
ply has a suitable earthing
connection.
• The power cord, if damaged,
must be replaced by the man-
ufacturer or by a service tech-
nician.
• Connect the plug to a socket
complying with current regu-
lations, located in an access-
ible place.
WARNING:
stalling the equipment, re-
move the protective film.
• Do not look directly at the light
through optical devices (bin-
before in-
oculars,
glasses...).
• This appliance can be used
by children aged from 8 years
and above and by persons
with reduced physical, sens-
ory or mental capabilities or
lacking in experience and
knowledge if they have been
given supervision or instruc-
tion concerning use of the ap-
pliance in a safe way and if
they understand the hazards
involved. Children must not
play with the appliance.
Cleaning and maintenance
by the user must not be per-
formed by children, unless
they are supervised.
• Children should be super-
vised to ensure that they do
not play with the appliance.
• The appliance is not to be
used by persons (including
children) with reduced phys-
ical, sensory or mental cap-
abilities, or lacking in experi-
ence and knowledge, unless
they have been given super-
vision or instruction.
• The symbol
or on its packaging indicates
that the product cannot be
disposed of as normal house-
hold waste. The product must
be taken to an appropriate
collection point for the recyc-
ling of electrical and elec-
tronic components. By ensur-
ing that this product is dis-
posed of correctly, you will
help prevent possible negat-
ive consequences for the en-
vironment and health that
magnifying
on the product
11