Table of Contents
Advertisement
Quick Links
C
S
OLLOIDAL
ILVER
G
ENERATOR
IONIC-PULSER
PRO / Standard S
Manual
since 1997
Dear customer,
You have purchased a proprietary device that has been developed in cooperation with professional
users. Already in 1997, Medionic GmbH was the first company in the German-speaking countries
that made colloidal silver known to the public. In the meantime, almost all book authors work with
our equipment and many silver solutions that are available in the mail-order business and in
pharmacies are produced with it. Studies of several independent laboratories confirm our
information about concentration and quality of the produced silver dispersions (model Standard S).
Ionic-Pulser is a protected trademark in Europe which is registered at the European Patent Office.
Attention: Similar designations do nothing have in common with our original equipment. These
devices are also operating on the principle of electrolysis but not on the Ionic Pulser ® system that
makes possible exact concentrations as shown in the table below.
Please note that with conductance measuring instruments (TDS Meter) - even if they are calibrated
in ppm - it is possible to determine real solutions such as salt solutions but not the concentration of
metal dispersions, e.g. colloidal silver. The stated values in our table were determined and
confirmed using complex laboratory measurement procedures.
®
IONIC-PULSER
- best results even with bi-distilled water - there are no additional
measuring instruments required! - The device is automatically set to different water
qualities and temperatures.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Medionic IONIC-PULSER PRO
Summary of Contents for Medionic IONIC-PULSER PRO
- Page 1 You have purchased a proprietary device that has been developed in cooperation with professional users. Already in 1997, Medionic GmbH was the first company in the German-speaking countries that made colloidal silver known to the public. In the meantime, almost all book authors work with our equipment and many silver solutions that are available in the mail-order business and in pharmacies are produced with it.
- Page 2 Preparation The silver electrodes have to be inserted into the sockets having a slant. With a bit of sensitivity they are inserted automatically in the correct angle. 1. Heat distilled water (demineralised) in a metal or heat- resistant glass container until the boiling point, let it cool down for about 3 minutes, and then put it into a glass.
- Page 3 Choose the amount of water in the horizontal line (size of the production container), in the vertical line below the desired ppm value, and read on the left side, on the same level, the production time. Table for Ionic-Pulser PRO: Table for Ionic-Pulser STANDARD S: * When using bi-distilled water, the production time has to be extended for 3 minutes.
- Page 4 Storage of Colloidal Silver The finished silver solution is usable for months but it is losing effect continuously. Colloidal silver with a large amount of positively charged ions is particularly effective and should be used as fresh as possible. In order to keep its optimal condition, the following advices have to be taken into consideration: Do not store in plastic or metal containers but in dark glass bottles.
- Page 5 Information about environmentally suitable disposal may be obtained from the relevant department in your community. Medionic Gerätebau, Radibor WEEE -Reg.-Nr. DE 60236950 Customer Service Before you send a unit back to us, please check whether the malfunction can be repaired by your own, according to the information given in “Repair Malfunctions”, or call us.
Need help?
Do you have a question about the IONIC-PULSER PRO and is the answer not in the manual?
Questions and answers