Subscribe to Our Youtube Channel
Related Manuals for Medionic Ionic-Pulser PRO3
Summary of Contents for Medionic Ionic-Pulser PRO3
- Page 1 Manual ® Ionic-Pulser PRO3 Detailed instruction manual for preparation of colloidal silver solution...
- Page 2 In 1997, the former Medionic GmbH was the first company in German-speaking countries to promote colloidal silver. Authors work with our devices, and many silver solutions, which are available through mail order and pharmacies, ®...
- Page 3 glass and electrode surfaces as well as electrochemical processes the silver concentration is always lower than the silver release. ® The lonic-Pulser compensates changes in temperature, conductivity, the quality of the water used and the electrode surface. The silver release is the same for each type of water and proportional to the time of production.
- Page 4 * If bidistilled water is used, the specified production time must be extended by 5 minutes. Do not heat the silver solution during and after the process! At low concentrations, colloidal silver is colourless and tasteless. At higher values, a discolouration may occur.
- Page 5 Trouble-shooting • Control lamp on the power supply unit does not light up Main plug has no contact, house fuse has triggered. • Indicator light on the device does not light up The silver electrodes or power supply unit are not plugged in properly, the silver electrodes are not immersed in the water.
- Page 6 PRO 3 Radibor, 1st September 2018 _______________________ Managing Director © 2019 Medionic – all rights reserved. Medionic GmbH & Co. KG | Großbrösern 1 | D-02627 Radibor info@medionic.de | www.medionic.de | WEEE-Reg.-Nr. DE 99132281 Other languages: www.medionic.de/documents19/ - 6 -...
Need help?
Do you have a question about the Ionic-Pulser PRO3 and is the answer not in the manual?
Questions and answers