HACA LEITERN 0529.1913 Instructions For Assembly And Use

Folding rest platform

Advertisement

MA 5103 b-UK
Instructions for assembly and use
for the model types 0529.1913, 0929.1913, 0544.1913,
0944.1913 and 0643.1913
HACA – Folding rest platform
Caution: Incorrect assembly can lead to a risk of death!

1. General information

The HACA rest platform can be mounted on all fixed
HACA two-rail ladders as well as on all fixed HACA single-
rail ladders.

2. Assembly

The assembly can be carried out on any rung of the lad-
der. Depending on the version, the assembly accessories
include special HACA nuts with a grip coating. For identifi-
cation purposes, these should be mounted so that the
blue coating can be seen from the outside.
A tightening torque of 35 Nm applies to all screw con-
nections.
Pass the rest platform at the desired height behind the
ladder (Fig.2). Fold both platform gratings forward bet-
ween two rung sand lower the rest platform (Fig. 2a)
until the platform gratings rest on the rung (Fig. 2b).
Further assembly is described in the following points for
the different ladder types.
Fig. 2
Lorenz Hasenbach GmbH u. Co. KG · D-65517 Bad Camberg · Tel. 0049 6434 / 25-0 · www.haca.com
Stand: 04-2021
Please read before assembly!
Please contact our head office in Bad Camberg,
if you have any queries regarding the assembly.
Fig. 2a
Teile-Nr. 01/0117000455
Fig. 1
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 0529.1913 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for HACA LEITERN 0529.1913

  • Page 1 MA 5103 b-UK Teile-Nr. 01/0117000455 Instructions for assembly and use for the model types 0529.1913, 0929.1913, 0544.1913, 0944.1913 and 0643.1913 HACA – Folding rest platform Please read before assembly! Caution: Incorrect assembly can lead to a risk of death! Please contact our head office in Bad Camberg, if you have any queries regarding the assembly.
  • Page 2 MA 5103 b-UK Teile-Nr. 01/0117000455 2.1 Assembly on two-rail lad- ders Rest platform model 0529.1913/0929.1913 Stop the folding rest platform at the desired height (see 2nd assembly + Fig. 3). Insert the screws with coun- ter plate and spacer sleeve from the...
  • Page 3 MA 5103 b-UK Teile-Nr. 01/0117000455 2.2 Assembly on aluminium single-rail ladders Rest platform model 0643.1913 Insert the supplied T-bolts from the front through the holes (Fig. 1). Insert a washer from behind and screw on a nut. The thread should protrude far enough from the nut in order that it can be gripped.
  • Page 4 MA 5103 b-UK Teile-Nr. 01/0117000 3. Use To unfold the platform, first climb one rung higher on the ladder than the rung that the platform is atta- ched to. Then with a sideways movement of the tip of your foot, fold the platform forwards so that it rests on the ladder rung.

This manual is also suitable for:

0929.19130544.19130944.19130643.1913

Table of Contents