Accessories - Hi-Tech All-U-Need GLASS/CRYSTAL Instruction Manual

For more Hi-Tech Diamond products and accessories, visit hitechdiamond.com.
Backing plates
Our 6" and 8" acrylic backing plates provide a
flat surface to back diamond discs and polishing
pads. They are 3/8" thick and have 1/2" arbor
holes.
Final polish pads
Our 6" and 8" final polishing pads are specially
designed to put a mirror polish on stone and
glass. They are pre-charged with cerium oxide so
you don't need to mess with slurry or diamond
paste .
12

ACCESSORIES

Tech-11 polishing pads
Our 6" and 8" Tech-11 polishing pads are made
with a thick felt and serve as a general polishing
pad to polish stone and glass. Use with cerium
oxide, tin oxide or diamond compound.
Glass grinding bits
Our glass grinding bits are used for shaping edges
and creating grooves in stained glass for wire
wrapping. Bits with 3/8" arbor holes conveniently
fit onto the motor shaft of the All-U-Need,
transforming this flat lap into a power-horse glass
grinder. Select from the following grits: 60#, 80#,
100#, 220#, 360# and 600#.