Advertisement
Quick Start Guide
For Glucose Monitor
3
Insert a new disposable lancet rmly into the lancet
holder and take a blood sample
4
Insert a test strip with the contact bars facing upwards
into the meter's test strip port. Apply the blood sample
to the end of the test strip. When the measurement
concludes, the results are shown on the display.
5
Remove the test strip and the screen will turn o . Stand
within 10 feet of the gateway and press the power
button on top of the glucometer to transmit the
reading to the gateway. You can take readings while
away from the gateway. Press this button the next time
you are close to your gateway to transmit all of your
readings.
6
If the LED ring is Green, you have properly taken a
measurement
and that measurement has been
successfully transmitted to your healcare provider.
Take one measurement once per day unless otherwise
advised by your healthcare provider. The LED on your
Tenovi Gateway will turn
day indicating you must take a measurement for that
day.
Measurement Needed
Red
at the beginning of each
Measurement Successfull
Advertisement
