Tenovis BGM Quick Start Manual

For further assistance on how to
use your Tenovi device,
please contact a Tenovi representative
at:
Phone: (714) 418-5658
Email:
support@tenovi.com
© 2023 Tenovi Co.
All rights reserved. Republication, duplication or modi cation
in whole or in part is prohibited without prior written permission
from Tenovi. All trademarks are owned by or licensed to
Tenovi, Co. unless otherwise noted.
Revision 03.21.23
Quick Start Guide
For Glucose Monitor
1
Plug your gateway into a power outlet with the provided
power cord and wait until the LED on the gateway turns
red .
2
Insert the battery into the back of the
glucometer. Stand within 10 feet of the gateway
and press the top button on the glucometer. The
gateway will beep indicating that it has
connected successfully to the glucometer.