Siemens EX8 LY Series Instruction Manual page 32

en Home Connect
Automatic registration in the home network
You require a router that has WPS functionality.
You require access to your router.If you do not have
this, follow the steps for "Manually logging into your
home network".
Switch on the hob.
1.
Touch and hold the
2.
The product information is displayed.
0
Touch the symbol repeatedly until the
3.
setting appears.
‹
lights up on the cooking position display.
‚
Set the value in the control panel.
4.
In the control panel,
Press the WPS button on the router within the next
5.
two minutes.
D
If the symbol no longer flashes in the control
panel but, instead, lights up constantly, the hob is
connected to the home network.
Note: If no connection can be established, the
ƒ
value "Connect manually" appears. Manually log
the appliance into the home network or restart the
automatic connection.
The appliance automatically tries to connect to the
app and the setting
flashes in the control panel.
Start the app on the mobile device and follow the
6.
instructions for automatic network registration.
The registration procedure has been completed once
‹
the value appears on the cooking position display.
32
0
symbol for four seconds.
•'‚
‚ D
and the symbol flash.
•'ƒ is displayed. The value
Manual registration in the home network
Switch on the hob.
1.
Touch and hold the
2.
The product information is displayed.
Touch the
3.
setting appears.
‹ lights up on the cooking position display.
Set the ƒ value in the control panel.
4.
In the control panel,
Use the "Home Connect" SSID and the "Home
5.
Connect" key to log your mobile device into the hob
network.
‚
0 symbol for four seconds.
0 symbol repeatedly until the
ƒ
and the symbol
•'‚
D
flash.