WWW.INDEXELEKTRO.NL Purpose of these instructions - Working in hazardous areas, the safety of personnel and plant depends on complying with all relevant safety regulations - Staff working on assembly and maintenance, therefore have a particular responsibility. They require precise knowledge of the applicable standards and regulations.
- specification 5, 6 Design code of product Design year Productcode of INDEX ELEKTRO BV Main Technical Data Basic data of explosion-proof LED Linear light fittings: - Ex mark of product (not fitted with position switch): II 2GD Ex eb mb op is q IIC T5/T4 Gb Ex tb op is IIIC T80°C Db...
Page 4
WWW.INDEXELEKTRO.NL Outline dimensions and mounting way Ø Z086 / x LED W, Z086 / x LED W-YJ Z0865 - 725mm. Z0866 - 1335mm. Ceiling type Z0865 - 400mm. 4xM8 Z0866 - 800mm. Ø7 Nut M8 Pendant type Z0865 - 400mm. Z0866 - 800mm.
Page 6
WWW.INDEXELEKTRO.NL Outline dimensions and mounting way Z086 / x LED W-PM, Z086 / x LED W-YJ-PM Ø45 Ø42 M25 x 1.5 Type Z0865 2635 2645 Z0866 1310 1440 1405 2740 2750 Explosion-proof (emergency) LED linear light fittings ( Pole Mounting Diagram: Protective cover 1xM25 Cable gland...
Page 7
WWW.INDEXELEKTRO.NL Outline dimensions and mounting way Ope n Operations and wild forces are prohibited when the transparent lamp cover is in open state. The bolts can be used for fixing reflector in the place where there is high-frequency vibrations. Push LED light source module fixed by screws, At the time of change, Please loosen the screws! Warning: Please don't disc harge or replace the battery in...
WWW.INDEXELEKTRO.NL Wiring diagram External light switch Wiring diagram for emergency LED linear light fitting Operation/installation - Transport and storage in original packaging only - National safety and installations regulations and the generally accepted rules of engineering practice must be observed when mounting and operating this equipment. The users shall follow instructions in order to ensure the normal working and safety of the explosion-proof (emergency) LED linear light fitting - Explosion-proof(emergency)LED linear light fitting is suitable for use in hazardous areas, zone 1-2 and 21-22.
- Modifications to the device or changes of its design are not permitted. - If there are damaged explosion-proof parts, only original parts supplied by Index Elektro BV may replace them. If you have any question about fault, consult or return the product to Index Elektro BV for repair.