PurePro HF-8367 User Manual

This upgrade kit provides everything you need to upgrade your system with a booster pump,
including a high and low-pressure switch to detect when your water reservoir is full and disable
the booster pump accordingly.

SAFETY INFORMATION

WARNING: This product is designed for connection to your homes water supply & mains
power. Failure to adhere to the below points could lead to injury, flooding and/or
product damage.
• Prior to operation check all connections are secure.
• This product is only suitable for use indoors, in dry environments due to the electrical
components incorporated into the system. Use outdoors or in humid environments such as in
close proximity to aquarium sumps can cause permanent damage to the system and/or
personal injury due to electric shock.
• Inspect all connections, fittings and tubes for cracks, leaks and bulging hourly for the first 6
hours of operation following installation. Inspect every 6 months thereafter and after any
system adjustments, replacing as necessary.
• Always turn off the source water connection to this product when not in use to prevent flooding
in the event of a leak.
• Connecting this system directly to your aquarium or aquarium sump is not recommended.
Doing so may result in the flooding of your aquarium and harm to your aquarium's inhabitants.
• This system is not designed to be connected directly to a float or similar valve within an
aquarium sump. These types of valves place excessive pressure on the system and its
electronics by causing the system to cycle rapidly between on an off cycles. This can cause
permanent damage to the system and the risk of an electrical short.
• It is recommended to install the system in an area with appropriate drainage to avoid flooding
in the event of a leak.
• Do not leave this product running and unattended for long periods of time.
• Make sure all electrical connections are up and away from any potential leaks or spills.
• Before making any adjustments to this product, disconnect it from mains power.
• Make sure hands are dry before touching any electrical components.
• In the event of a leak, turn off and disconnect it from mains power before making any
adjustments.
PUREPRO HF-8367 RO BOOSTER PUMP
What Are the Benefits of This Upgrade?
By adding the PurePro HF-8367 RO Booster Pump to your system, you
no longer need to worry about a lack of pressure from your homes
water supply.
With higher water pressure, your RO/DI system will produce more RO
production water with less wastewater and a much lower TDS value
on your RO production water, which will also dramatically reduce
your DI resin replacement costs.
USER MANUAL
Page 1 of 3