Download Print this page

PurePro HF-8367 RO BOOSTER PUMP User Manual

This kit includes everything that you will need to successfully upgrade your system with an RO

Booster Pump.

RO Tube Cutters or a Utility Knife

•

You will need to locate an area that you can mount the PurePro HF-8367 RO Booster

Pump.

A mounting bracket is supplied with the booster pump and it is important that it is mounted using

this bracket as it acts to reduce vibration and noise.

IMPORTANT: Do not run the booster pump for periods greater than 3 hours. Doing so

can cause serious and permanent damage to the pump. Allow a rest period of 1 hour

between uses.

PUREPRO HF-8367 RO BOOSTER PUMP

What Are the Beneﬁts of This Upgrade?

The RO membranes used in all Reef Pure RO Systems have an

optimal minimum operating pressure of 50psi.

By adding the PurePro HF-8367 RO Booster Pump to your system,

you no longer need to worry about a lack of pressure on your

homes water supply.

Your system will produce almost twice the amount of water in the

same amount of time. You will produce less wastewater and a

much lower TDS value on your RO production water, which will

also dramatically reduce your DI resin replacement costs.

Table of Contents

Need help?

Do you have a question about the HF-8367 RO BOOSTER PUMP and is the answer not in the manual?

Page 1 • Before You Get Started! You will need to locate an area that you can mount the PurePro HF-8367 RO Booster Pump. A mounting bracket is supplied with the booster pump and it is important that it is mounted using this bracket as it acts to reduce vibration and noise.
Page 2: Installation Instructions
Installation Instructions 1. The PurePro HF-8367 RO Booster Pump has both an inlet and outlet connector. This is indicated by arrows which illustrate the direction of ﬂow. 2. Connect your system’s white feed water inlet tube to the 1/4” push-connect input on the booster pump.