INSTALL THE MINIOPRO
Connect the included Adhesive Bracket to the
Bracket Socket on the dashcam. Then affix the
MINIOPRO to the inside surface of your windshield.
For optimal results, place the MINIOPRO near the
rear-view mirror, as shown in the diagram below.
Connect one end of the USB Power Cable to the
MINIOPRO and the other end to the provided USB
car charger. The user should secure the cable
between the headliner and the windshield to avoid
blocking the driver's visibility.
The GPS is embedded in the provided USB Power
Cable. As such the user should affix the cable and
GPS to the windshield with the adhesive sticker.
When the vehicle starts up, the MINIOPRO will
start up as well and automatically begin recording
3