ATOMIC MASS GAMES STAR WARS SHATTERPOINT SWP06(A)-OBI-WAN KENOBI Read This First

Download this manual

A01

A02

A08

ALL PARTS SHOULD BE ASSEMBLED USING PLASTIC GLUE. PERMISSION GRANTED TO PRINT OR PHOTOCOPY FOR PERSONAL USE.

SWP06 (A)-OBI-WAN KENOBI

READ THIS FIRST

Be sure to use a pair of sharp hobby clippers to remove the miniature components from the sprue. Carefully clean the excess material and mold lines

wia sharp hobby knife. Check the fit of each part before gluing. Use a small amount of hobby plastic glue to assemble the components. Use caution

with all products and follow all manufacturer instructions. Adult supervision is recommended for children under the age of 16. Have fun!

JOIN THE COMMUNITY

Use #ShatterPaint to share your miniature photos and

be a part of the Star Wars™: Shatterpoint community!

A03

A04

FINAL

AtomicMassGames

A06

A05

AtomicMassGames

Atomic_Mass_Transmissions

A07

Need help?

Do you have a question about the STAR WARS SHATTERPOINT SWP06(A)-OBI-WAN KENOBI and is the answer not in the manual?

Page 1 SWP06 (A)-OBI-WAN KENOBI READ THIS FIRST Be sure to use a pair of sharp hobby clippers to remove the miniature components from the sprue. Carefully clean the excess material and mold lines wia sharp hobby knife. Check the fit of each part before gluing. Use a small amount of hobby plastic glue to assemble the components. Use caution with all products and follow all manufacturer instructions.
Page 2 SWP06 (B)-CODY FINAL ALTERNATE HEAD ALL PARTS SHOULD BE ASSEMBLED USING PLASTIC GLUE. PERMISSION GRANTED TO PRINT OR PHOTOCOPY FOR PERSONAL USE. © LFL © AMG...
Page 3 SWP06 (C)-CLONE TROOPER POSE A FINAL ALL PARTS SHOULD BE ASSEMBLED USING PLASTIC GLUE. PERMISSION GRANTED TO PRINT OR PHOTOCOPY FOR PERSONAL USE. © LFL © AMG...
Page 4 SWP06 (D)-CLONE TROOPER POSE B FINAL ALL PARTS SHOULD BE ASSEMBLED USING PLASTIC GLUE. PERMISSION GRANTED TO PRINT OR PHOTOCOPY FOR PERSONAL USE. © LFL © AMG...