2. Click Next. The Smart Wizard software detects the adapter.
3. Follow the onscreen prompts to install the driver and complete the installation.
How you connect to a network depends on what you selected during custom installation.
If you installed the Smart Wizard with automatic configuration, see the following
•
section,
Using the Smart Wizard to Connect to a Wireless
If you installed the Smart Wizard with manual configuration, the Settings tab displays.
•
See
Viewing Wireless Networks in Your Area
To use a Windows utility, see your Windows documentation or the On Networks
•
application note at
Networks.com/reference/enu/winzerocfg/index.htm.
Using the Smart Wizard to Connect to a Wireless Network
After the software is installed, you are prompted to connect to a wireless network.
1. One of the following screens displays:
WPS network
WPS network: A network in your area supports Push 'N' Connect (also called WPS).
•
Click Next, and follow the prompts to push the WPS button on your adapter and on
your router. Then connect without entering a password.
No WPS networks: Select a wireless network from the list and click Next. To connect
•
to a secure network, you must enter its passphrase or network key.
10 |
Chapter 1: Getting Started
http://documentation.On
N300 Micro USB WiFi Adapter N300MA
Network."
on page 17.
No WPS networks