Wireless-N Usb Adapter Led; Upgrading The Software - on networks N300MA User Manual

Micro USB WiFi Adapter LED
The LED shows the status of the wireless link as explained in the following table.
Micro USB WiFi Adapter

Upgrading the Software

Upgrades might be available at the On Networks website.
To check for an update and install it:
1. Open the Smart Wizard and click the About tab:
2. Click the Software Update Check button.
14 | Chapter 1: Getting Started
LED Meaning
Off The micro USB adapter in not plugged in to the USB port.
•
The micro USB adapter is in power save mode (default from
•
power up or reset).
Slow Alternating amber and blue. The micro USB adapter is
•
blinking scanning for a network.
Blue. The micro USB adapter is connecting to a network at 2.4
•
GHz.
Blinking The micro USB adapter is connected to a wireless network, and is
sending or receiving data.
Solid The micro USB adapter is connected to a wireless network, but it is
not sending or receiving data.
N300 Micro USB WiFi Adapter N300MA