Advertisement
Quick Links
Advertisement
Related Manuals for aquarius direct AD200
Summary of Contents for aquarius direct AD200
- Page 1 AD200 UNDER-COUNTER FILTRATION SYSTEM INSTALLATION GUIDE Sink Mains supply...
- Page 2 This product has been designed and between minimum 1.5 Bar (22 psi) to manufactured to the very highest quality The Aquarius Direct AD200 filter must a maximum 5.5 Bar (80 psi) to operate standards. Correctly installed and be installed using only the genuine...
- Page 3 2. Always make sure that the area that you intend to fit the Aquarius Direct filter system is clean, clear and free from clutter. 3. Always wear single use gloves and...
-
Page 4: Package Contents
PACKAGE CONTENTS Aquarius Direct AD200 filter technical data Inside the box you will Dimensions: w 92 x d 102 x h 270mm find the following items: Minimum water pressure: 1.5 Bar (22psi) Maximum water pressure: 5.5 Bar (80psi) 3/8 x ½... -
Page 5: Before You Begin
BEFORE YOU BEGIN Check the mains water pressure. The pressure must not be below 1.5 Bar (22 psi) or above 5.5 Bar (80 psi), test measured during a high demand period – (morning or lunch time). The optimum pressure is 3 Bar (44psi). The unit must be installed in an area that is not susceptible to freezing. - Page 6 (one side labelled ‘IN’ and one side for the AD200 filter system labelled ‘OUT’). 1. Turn on water supply. 5. Insert AD200 filter cartridge into the filter head by pushing up and turning 2. Check all connections for leaks. to the left a ¼ turn.
- Page 7 Quality suppliers of Point-of-Use water products If you require any help with this product or more information on our range of P.O.U products, please contact us by using the details below: info@aquariusdirect.com aquariusdirect.com...
Need help?
Do you have a question about the AD200 and is the answer not in the manual?
Questions and answers