Table of Contents
Advertisement
Plug the microwave oven into a different outlet so that microwave
*
oven and receiver are on different branch circuits.
THE MANUFACTURER is not responsible for any radio or TV interference
caused by UNAUTHORIZED MODIFICATION to this microwave oven. It is
the responsibility of the user to correct such interference.
ARCING
If you see arcing, press the "Pause/Cancel" button and correct the problem.
Arcing is the microwave term for sparks in the oven.
Arcing is caused by:
Metal or foil touching the side of the oven.
*
Foil not molded to food (upturned edges act like antennas).
*
Metal, such as twist-ties, poultry pins, or gold rimmed dishes, in the
*
microwave.
Recycled paper towels containing small metal pieces being used in
*
the microwaves.
Burnt (carbonized) food residue or grease spattered inside of
*
cabinet.
DO NOT LEAVE OVEN UNATTENDED WHILE COOKING!
GROUNDING INSTRUCTIONS
This appliance must be grounded. In the event of an electrical short
circuit, grounding reduces the risk of electric shock by providing an
escape wire for the electric current. This appliance is equipped with a
cord having a grounding wire with a grounding plug. The plug must be
inserted into an outlet that is properly installed and grounded.
WARNING: Improper use of the grounding plug can result in a risk of electric shock. Consult a
qualified electrician or service personnel if the grounding instructions are not completely understood,
or if Doubt exists as to whether the appliance is properly grounded.
If it is necessary to use an extension cord, use only a three wire extension cord that has a three
blade grounding plug, and a three slot receptacle that will accept the plug on the appliance. The
marked rating of the extension cord should be equal to or greater than the electrical rating of the
appliance.
1. Steady, flat location: When positioning the microwave oven, it should
be set on a steady, flat surface.
2. Ventilation: DO NOT BLOCK AIR VENTS. If they are blocked during
operation, the oven may overheat and eventually cause oven failure. For
proper ventilation, KEEP THREE INCHES OF SPACE BETWEEN THE
OVENS TOP, SIDES, REAR AND THE AREA WHERE THE UNIT IS TO
EN
INSTALLATION
7
Advertisement
Table of Contents
