Advertisement
5. Assemble the Panel and Guide Panel
(Recommended use of 12-gauge suction)
(1) Assemble the upper left/right first and assemble the bottom
left/right
* 12-gauge suction
(Recommendations)
6. Assemble the Guide Panel hook (Up 6
EA, Left 3 EA, Right 3 EA, Down 8 EA)
(1) Assemble according to Guide embo. (4 EA)
(2) Assemble the reflector sheet bellow the lens with your fingers.
(3) In the case of corner and center, place the side marked UP
on top.
190mm
480mm
715mm
130mm
*Dimensions in approximate position
550mm
970mm
Down
190mm
715mm
480mm
130mm
550mm
970mm
Up, Left, Right
- 23 -
7. Tighten the screws from back side(5
points) and bottom side of guide panel
Copyright ©
LG Electronics Inc. All rights reserved.
Only for training and service purposes.
Advertisement
