(3) Remove the bracket by pressing the side of the power cord bracket, pulling the power cord line upwards, and then pressing the
side of the code to remove the power cord.
(4) Preparing B/C remove after Checking the Module Latch Position.
Latch (86NANO85/90) : 2EA
(5) Remove the Latch 2EA and Back Cover by holding the center of the lower back cover and pushing it upwards as shown in the
picture.
Latch 1EA careful
Latch 1EA careful
- 15 -
Copyright ©
LG Electronics Inc. All rights reserved.
Only for training and service purposes.