Advertisement
Throttle Master
Product Instructions | Part No: 98005
KIT CONTENTS:
APPLICATION:
Verify accessory fitment at Kolpin.com prior to installation or usage.
BEFORE YOU BEGIN:
Failure to properly install or use Throttle Master could result in serious injury or death. Use only with approved vehicle fitment.
Verify up to date accessory instructions, warnings, and fitment at Kolpin.com prior to installation or usage. Read and follow opera-
tor's manual prior to installation and usage. Make sure your vehicle is clean and free of debris prior to installation.
SAFETY INFORMATION:
•
Inspect Throttle Master for damage. Do not use and replace if damage or wear does not allow for proper functionality. Be-
fore starting the ATV:
- Make sure Throttle Master is tightly secured on the OEM thumb throttle.
- Make sure throttle travels from no throttle to full throttle and full throttle to no throttle without interference
(minimum 1/8" clearance) from hand grips or other components / accessories. Repeat this check with the
handlebars in full left and full right position.
•
If the Throttle Master is impacted by an object (tree branch, debris, etc.), find a safe location to stop and assess the situation.
Inspect the Throttle Master for damage and function as mentioned directly above prior to resuming riding.
•
Do not modify the Throttle Master. Only use included mounting hardware for installation.
•
Loose-fitting riding gear, such as gloves and long-sleeve clothes, could interference with throttle control. Do not use Throttle
Master with riding gear that interferes with throttle control. Always follow ATV manufacturer's safety instructions for proper
riding gear.
Item
Qty
Part Description
1
1
Mounting Base
1
Throttle Master
2
3
2
1/4" Truss Head Bolt
4
2
1/4" Lock Nut
5
2
WARNING
WARNING
© 2022 Kolpin Outdoors Inc.
Rubber Cap
1
REV 04
Advertisement
Table of Contents
Related Manuals for Kolpin Outdoors Throttle Master
Summary of Contents for Kolpin Outdoors Throttle Master
- Page 1 • If the Throttle Master is impacted by an object (tree branch, debris, etc.), find a safe location to stop and assess the situation. Inspect the Throttle Master for damage and function as mentioned directly above prior to resuming riding.
- Page 2 3. Using the lock nuts, 1/4” truss head bolts, and a Phillips screw driver, required loosely tighten to hold the Throttle Master on the ATV throttle. See Illus- tration 1-1. 4. Check the location of your new Throttle Master. You can slide the Throttle Master Section outwards to obtain more leverage.
Need help?
Do you have a question about the Throttle Master and is the answer not in the manual?
Questions and answers