Advertisement
2. No Power
(1) Symptom
1) Doesn't minute discharge at module.
2) Non does not come in into the front LED.
(2) Check following
A Power cord is plugged with TV set?
Is the AC-INLET connected with
the power board?
Is the Fuse(F101,F801) on
Power Board normal?
Is the Power Board with
VSC Board though Cable connected?
Measure output voltages(16V,12V,5V) on the power board.
If the measured values is not normal, replace power board.
Copyright©2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
Yes
Yes
Yes
Yes
No
Plug the power cord.
No
Connect the AC-INLET
No
Replace the Fuses.
No
Connect the Cable.
- 12 -
LGE Internal Use Only
Advertisement
