Table of Contents
Advertisement
`16Y LED(UH95/UH96) Power Board Diagnostic method
1
▶ Check power board voltage.
▶ Fix the LCD MODEL switch to 24V.(Smart JIG)
3
▶ Connect the 28Pin Power Cable connector
to the Muitl Gender JIG 28Pin connector
2
▶ Disconnect the Main Board 28Pin Power Cable connector.
4
▶ When the OK(24V,12V) LED turns on, Power Board is normal.
▶ When the NG LED turns on, the Power Board
can be judged as defective.
A 28 (15/19)
Advertisement
Table of Contents
