Advertisement
Reading Format
G0
Reading only
G1
Reading with prefix
G2
Reading with buffer location
G3
Reading with buffer location and prefix
G4
Reading with time stamp
G5
Reading with time stamp and prefix
G6
Reading with time stamp and location
G7
Reading with time stamp, location, and prefix
Immediate Trigger and Self-test
H0
Initiate manual trigger
H1
Perform memory test
Buffer Configuration
I0
I1, value
I2
Analog Output Relative
J0
J1
J2, value
J3
Disable buffer
Buffer on, linear length=value
Buffer on, circular length=1024
Disable analog output relative
Enable analog output relative using next
reading
Enable analog output relative using value
Enable analog output relative, use present
value
17
Advertisement
