Download Print this page

Technical Specifications - Philips 140S Specification Sheet

14" tft lcd xga monitor
Hide thumbs Also See for 140S:

Advertisement

Technical Specifications

LCD panel
• Type
TFT LCD
• Screen size
14.1 inch / 35.8 cm diagonal
• Pixel pitch
0.279 x 0.279mm
• LCD panel type
1024 x 768 pixels,
R.G.B vertical stripe
Anti-glare polarizer, hard coated
• Effective viewing area
285.7 x 214.3mm
• Display colors
8 bits interface, 16M colors with
dithering
Scanning
• Vertical refresh rate
56~75 Hz
• Horizontal frequency
31~60 KHz
Video
• Video dot rate
80 MHz
• Input impedance
- video
75 ohm
- Sync
2K ohm
• Input signal levels
0.7 Vpp
• Sync input signal
Separate sync
Composite sync
Sync on green
• Sync polarities
Positive and negative
• Video interface
Analog (D-Sub) input only
Optical characteristics
• Contrast ratio
200 (typ.)
• Brightness
200 cd/m
• White chromaticity
x: 0.281 y: 0.311 (at 9300°K)
x: 0.312 y: 0.338 (at 6500°K)
• Viewing angle
Upper
(C/R 5)
Lower
Left
Right
• Response time
<50 ms (typ.)
Resolution & preset modes
• Maximum
1024x768 at 75Hz
• Recommended
1024x768 at 60Hz
• 14 user definable modes
• 14 factory preset modes:
H.freq (KHz)/ V.freq (Hz)
640 x 350
31.5/70
720 x 400
31.5/70
640 x 480
31.5/60, 35.0/67,
37.8/73, 37.5/75
800 x 600
35.2/56, 37.9/60,
48.0/72, 46.9/75
832 x 624
49.7/75
1024 x 768
48.4/60, 56.5/70,
60.0/75
(Interlace mode is not applicable)
Plug and play compatibility
• Display data channel DDC 1/2B (VESA)
• Microsoft Windows 95/98 & Windows 2000 compatible
We recommend using 1024 x 768 at 60Hz non-interlaced mode for the best picture quality
As an Energy Star partner, Philips has determined that this product meets the Energy Star
guidelines for energy efficiency.
Microsoft and Windows are registered trademarks of Microsoft Corporation
Macintosh is a registered trademark of Apple Computer, Inc.
2
(typ.)
30°(typ.)
55°(typ.)
63°(typ.)
63°(typ.)
14" TFT LCD XGA monitor
Power management
Complies with EPA Energy Star and NUTEK specifications
• Typical operation
27W
• Sleep mode
3W
Low-emission characteristics
• Complies with MPR-II and TCO '99 specifications
Monitor controls and functions
• Front
Power on/off
OSD (OK)
Auto
Up/Down (Brightness) - push button
Left / Right
• LED indicator
Green
Amber
Flashing Green
Connections and cables
• Connections
- Video
15-pin D-sub (analog)
- DC input
6.5mm DC connector
- Power
External 18V AC/DC Adapter
• Cables
D-Sub Video and Power
Regulatory approvals
• TUV/GS,TUV-Ergo
• FCC-B, UL, CSA
• SEMKO
• MPR-II Low Emission
• CE Mark
• NUTEK, Energy Star
• TCO '99
Physical specifications
• Dimension (WxHxD)
361 x 343 x 165 mm (incl. Pedestal)
• Tilt / Swivel
-5°~35° / ±40°
• Weight
4.6 Kg
• Power supply
100 – 240 VAC, 50/60 Hz
• Power consumption
27 W* (typ.)
• Temperature (operating)
+5°C to +35°C
• Temperature (storage)
-20°C to +60°C
• Relative humidity
20% to 80%
• System MTBF
50K hrs (excluding LCD panel, CCFL)
* Resolution 1024 x 768, standard size, contrast max., brightness 50%, 9300°K,
full white pattern.
All data subject to change without notice
Release date: March 2000
www.pcstuff.philips.com
140S
- push button
- push button
- push button
- push button
power on
sleep mode
new mode

Advertisement

loading