M2M enginko MCF-LW12TER Manual
  1. Manuals
  2. Brands
  3. M2M Manuals
  4. Accessories
  5. enginko MCF-LW12TER
  6. Manual

M2M enginko MCF-LW12TER Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Table of Contents
MCF-LW12TER Operating Manual
Important safety information
Read this manual before attempting to install the device! Failure to observe recommendations
included in this manual may be dangerous or cause a violation of the law. The manufacturer
will not be held responsible for any loss or damage resulting from not following the
instructions of this operating manual.
Do not dismantle or modify in any way.
The device is only intended for indoor use. Do not expose it to moisture.
The device is not intended to be used as a reference sensor, and enginko Srl will not be held liable for
any damage which may result from inaccurate readings.
Avoid mechanical stress
Do not use any detergent or alcohol to clean the device.
m2m Germany GmbH | Am Kappengraben 18-20 | 61273 Wehrheim | 06081 5873860

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the enginko MCF-LW12TER and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for M2M enginko MCF-LW12TER

Summary of Contents for M2M enginko MCF-LW12TER

  • Page 1 The device is not intended to be used as a reference sensor, and enginko Srl will not be held liable for any damage which may result from inaccurate readings. Avoid mechanical stress Do not use any detergent or alcohol to clean the device. m2m Germany GmbH | Am Kappengraben 18-20 | 61273 Wehrheim | 06081 5873860...

  • Page 2: Technical Data

    LoRaWAN® network. Ideally suited for a wide range of applications such as home buildings, air quality monitoring and energy saving applications. 2. Overview 2.1 Technical data m2m Germany GmbH | Am Kappengraben 18-20 | 61273 Wehrheim | 06081 5873860...

  • Page 3: Installation

    The sensor must be installed vertically on a wall at about 1.5mt height. It must be at least 30cm away from metal objects, and 1mt away from electronic devices. m2m Germany GmbH | Am Kappengraben 18-20 | 61273 Wehrheim | 06081 5873860...

  • Page 4: Power On/Off

    There are two ways to power on the sensor: With NFC: Move the NFC antenna of the mobile (the exact position varies depending on the model of m2m Germany GmbH | Am Kappengraben 18-20 | 61273 Wehrheim | 06081 5873860...
  • Page 5 • Mechanical power on: Open the case using a screw driver as follow: By using a screw driver push button for 1s as follow, moving right: m2m Germany GmbH | Am Kappengraben 18-20 | 61273 Wehrheim | 06081 5873860...
  • Page 6 10min reading 15min reading 30min reading > 10 SF12 > 10 > 10 > 10 2.5.1 Battery replacement remove the back panel of the sensor with a small screwdriver: m2m Germany GmbH | Am Kappengraben 18-20 | 61273 Wehrheim | 06081 5873860...
  • Page 7 (batteries are secured with dual locking tape) and disconnect from the connectors: Connect the new batteries and put them in place (replace the tape if needed): m2m Germany GmbH | Am Kappengraben 18-20 | 61273 Wehrheim | 06081 5873860...
  • Page 8 Place the rear panel paying attention to the wires. After the batteries replacement, internal counters need to be resetted. m2m Germany GmbH | Am Kappengraben 18-20 | 61273 Wehrheim | 06081 5873860...

  • Page 9: Firmware Update

    DevEUI of the sensor when you ask for that code): At the end of the procedure the battery level displays 100%. 2.6 Firmware update Download the latest firmwares available on the smartphone with LoRaTool app: m2m Germany GmbH | Am Kappengraben 18-20 | 61273 Wehrheim | 06081 5873860...
  • Page 10 Germany GmbH | Am Kappengraben 18-20 | 61273 Wehrheim | 06081 5873860...
  • Page 11 Update the sensor with LoRaTool: m2m Germany GmbH | Am Kappengraben 18-20 | 61273 Wehrheim | 06081 5873860...
  • Page 12 Value can be between 10 and 65535 minutes. Period interval can be set with App or with downlink command. The device sends extra reports when the measurement changes in accordance with the set thresholds. m2m Germany GmbH | Am Kappengraben 18-20 | 61273 Wehrheim | 06081 5873860...
  • Page 13 Value can be from -300 to 3000 meters. Altitude can also be set with downlink command. 4.4 Humidity 5 LoRaWAN network The sensor is compliant with LoRaWAN® specification 1.0.2, regional 1.0.2b. m2m Germany GmbH | Am Kappengraben 18-20 | 61273 Wehrheim | 06081 5873860...
  • Page 14 The device exits factory activated with NONE mode. On request devices can be shipped aleady activated. Note: in OTAA AppKey is write only, in reading the field will always be empty, even if set. m2m Germany GmbH | Am Kappengraben 18-20 | 61273 Wehrheim | 06081 5873860...

  • Page 15: Other Settings

    If not handled in the right way can cause a unnecessary battery consumption (battery life < 2 years). Please check chapter 2.1 UnConfirmed: set for unconfirmed uplinks (default: confirmed uplink). m2m Germany GmbH | Am Kappengraben 18-20 | 61273 Wehrheim | 06081 5873860...
  • Page 16 As default passwords are equal to 0. Allowed values range from 0 to 99999999 (only numbers). To change the passwords, set the new values with the LoRa Tool App: m2m Germany GmbH | Am Kappengraben 18-20 | 61273 Wehrheim | 06081 5873860...
  • Page 17 Once the passwords are setted, to gain access from LoRa Tool to the sensor, open the App: and set the right values before reading from the device: m2m Germany GmbH | Am Kappengraben 18-20 | 61273 Wehrheim | 06081 5873860...

  • Page 18: Configuration File

    7.1 Multi devices configuration WIth LoRa Tool App is possible to configure many devices in an easy way. m2m Germany GmbH | Am Kappengraben 18-20 | 61273 Wehrheim | 06081 5873860...
  • Page 19 LoRaWEB online tool, where for each sensor it is possible to find documentation, javascript examples for parsing, downlink generator and uplink decoder: (iot.mcf88.cloud/LoRaWeb) m2m Germany GmbH | Am Kappengraben 18-20 | 61273 Wehrheim | 06081 5873860...

  • Page 20: Ordering Code

    MCF-LW12TER enginko LoRaWAN® indoor environmental EU863-870 MCF-LW12TER-AS enginko LoRaWAN® indoor environmental sensor AS920-925 MCF-LW12TER-US enginko LoRaWAN® indoor environmental sensor US902-928 MCF-LW12TER-AU enginko LoRaWAN® indoor environmental sensor AU915-928 m2m Germany GmbH | Am Kappengraben 18-20 | 61273 Wehrheim | 06081 5873860...

  • Page 21: Declaration Of Conformity

    Directive 2014/53/EU. 12 Contacts enginko Srl Via Roma 3 I-28060 Sozzago (NO) T : +39 0321 15 93 088 E :info@enginko.com PEC:enginkosrl@legalmail.it W:enginko.com Rev.1 m2m Germany GmbH | Am Kappengraben 18-20 | 61273 Wehrheim | 06081 5873860...

Table of Contents