Advertisement
Advertisement
Table of Contents
Related Manuals for Reshable MR11B0218
Summary of Contents for Reshable MR11B0218
- Page 1 User Manual Model Number： MR11B0218 MR11E0219...
-
Page 2: Dear Customer
Please do not hesitate to contact us for help (Be sure to mark the SKU NUMBER, e.g., Footrest MR11R0246, and the TRACKING NUMBER). Our RESHABLE team with factory direct after-sales service will reply within 24 hours and do our best to resolve the problem for you. -
Page 3: Hardware List
PRODUCT ASSEMBLY Hardware List Check the package contents before getting started ! STEP 1 Seat Backrest １ＰＣ １ＰＣ Reclining Lever １ＰＣ Towel Hook １ＰＣ Ｆｏｏｔ ｂａｒ １ＰＣ Ｂａｓｅ １ＰＣ Note: Please refer to the picture for the assembly direction of the Ｆｏｏｔ Bａｒ... - Page 4 PRODUCT ASSEMBLY PRODUCT ASSEMBLY STEP 2 STEP 3 Seat １ＰＣ Ｈａｎｄｒｅｓｔ 1ＰＣ The circles is the conncting position of big bolt or small bolt Second:Install the Seat onto the Pump Top Third:Install Handrest to Seat Step 1:Locate the slot on the short column under the Seat. Align Step 1:Remove the 4 big bolts and 2 small bolts prefixed in the this slot with the black pin at the pump top.
- Page 5 PRODUCT ASSEMBLY PRODUCT ASSEMBLY STEP 4 STEP 5 Footrest 1ＰＣ １ＰＣ Footrest Support Leg Rest 3ＰＣS Footrest Support Fourth:Install Leg Rest to Footrest Fifth: Install Footrest Low Support and Footrest Step 1:Remove the 2 big bolts prefixed on the leg rest then install the High Supports to Footrest leg rest to the footrest by the 2 big bolts removed from the leg rest.
- Page 6 PRODUCT ASSEMBLY PRODUCT ASSEMBLY STEP 7 STEP 6 Backrest １ＰＣ Seventh:Install Backrest to Chair Sixth: Install Footrest to Chair Step 1:Removed 4 bolts prefixed on the backrest. Step 1:Remove the 2 big bolts prefixed on the footrest. Step 2:Install the backrest to the chair by the 4 bolts removed from the Step 2:Install the footrest to the chair by the big bolts removed from the backrest.
- Page 7 PRODUCT ASSEMBLY PRODUCT ASSEMBLY STEP 9 STEP 8 Towel Hook １ＰＣ Reclining Lever １ＰＣ Ninth：Install Towel Hook to Handrest Eighth：Install Reclining Lever to Chair Step 1:Removed the 2 bolts prefixed on the handrest. Step 1:Loosen the bolts prefixed on the bottom of Reclining Lever. Step 2:Install the towel hook to the handrest by the 2 bolts Step 2:Set Reclining Lever on to the bent iron bar.
- Page 8 PRODUCT ASSEMBLY PRODUCT ASSEMBLY Hold up First:Lock & Unlock the rotation Third:Lower the Chair 1.Step down foot bar to the bottom and hold it to allow 1.In the natural state, the upper part of the pump can rotate freely on the pump rotation axis. the chair to lower.
-
Page 9: Frequently Asked Questions
OPERATE THE CHAIR OPERATE THE CHAIR Frequently Asked Questions A: Please check whether the foot lever is stepped to the lowest. If it's the lowest but Q: What if the chair is difficult to rotate? still has the problem, there could be something wrong with the pump.
Need help?
Do you have a question about the MR11B0218 and is the answer not in the manual?
Questions and answers