2 persons are needed Thank you for your purchase. A wrench & an RESHABLE is created to be the perfect starting spot for any barbers. Supplying top-quality allen key are barber supplies like barber chairs, salon stations, rolling makeup cases, styling drawer...
Hardware List NOTICE: If your package is missing parts or you have problems with assembly, please call us directly or message us, Our customer service team will address any questions or concerns you may have. Have this manual open and ready for reference. Seat Backrest 1PC...
Page 4
PRODUCT ASSEMBLY PRODUCT ASSEMBLY Check the package contents before getting started ! STEP 2 STEP 1 Right handrest 1PC Left handrest 1PC 2PCS Backrest connector Foot bar 1PC Pump 1PC Base 1PC Black bolt 6PCS Note: Please refer to the picture for the assembly direction of the foot lever.
Page 5
PRODUCT ASSEMBLY PRODUCT ASSEMBLY STEP 3 STEP 4 Seat 1PC Backrest 1PC Bolt 6PCS 6PCS Washer Left handres t Right handrest Third:Install Handrest to the Seat Fourth:Install Backrest to the assembled Seat Step 1:Install the left handrest and right handrest to the seat with Step 1:Remove the 4 bolts which was Pre-fixed in the backrest.
Page 6
PRODUCT ASSEMBLY PRODUCT ASSEMBLY STEP 5 STEP 6 Leg support Footrest 1PC 1PC Sixth:Install the Footrest to the Seat Fifth:Install Footrest to Leg support Step 1:Remove the 2 bolts which was pre-fixed in the seat. Step 1:Remove the 2 pre-installed bolts in the bottom of the Step 2:Install the leg support to the seat by the 2 bolts .
Page 7
OPERATE THE CHAIR OPERATE THE CHAIR STEP 7 Hold up First:Lock & Unlock the Chair 1.Lift the Foot Bar up to lock the seat in place. 2.Step the Foot Bar down to unlock the seat to allow to rotate freely. Seventh:Set the Seat onto the top of Pump Second:Rais the Chair...
OPERATE THE CHAIR OPERATE THE CHAIR Frequently Asked Questions A: Please check whether the foot lever is stepped to the lowest. If it's the lowest but Q: What if the chair is difficult to rotate? still has the problem, there could be something wrong with the pump.
Need help?
Do you have a question about the MR11R0228 and is the answer not in the manual?
Questions and answers