Device Structure - Family WONBONG WBF-1000 LA Instructions Manual

Do not turn on the device without water!
Read this manual carefully, follow the instructions given in it and save it for
future reference!
1. Water bottle slot
2. Water cooling indicator
3. Water heating indicator
4. Hot water faucet
5. Cold water faucet
6. Pallet
7. Switch (ON/OFF)
8. Fuse
9. Thermostat
10. Drain plug
11. Condenser
12. Electric plug
13. Power cord

DEVICE STRUCTURE

LIST OF POSSIBLE FAULTS AND METHODS FOR THEIR
ELIMINATION
Malfunction Probable Cause
The machine does not 1. Incorrect mains
work voltage
2. Faulty power cord
3. Fuse blown
Poor cooling 1. Poor rear panel
cooling
2. The temperature of the
incoming water is not
correct
3. The thermostat is
incorrectly adjusted
Noise and strange 1. The machine is not
sounds installed horizontally
2. Touching other objects
Resolve method
1. Mains voltage must be
220 V
2. Use the correct power
cord
3. Replace fuse
1. For good ventilation,
install the machine at
least 15 cm from the wall
2. The temperature of the
incoming water must be
below 10°
3. Adjust the thermostat
in the workshop
1. Place the machine on
a solid, level surface
2. Avoid touching other
objects