Advertisement
Approval
4. OPERATION
The HWAT-ECO version 5 has a resistive touchscreen user interface:
The unit will go in dim mode after 2 minutes with no interaction.
The unit will switch to the main screen after 2 minutes of no-interaction
on the parameter input screens.
4.1 Quick install
When the unit is powered up for the first time, a quick setup must be
executed before the unit is ready to start. The Quick start helps to set all
important settings, the unit will go in main screen mode automatically
when done. Quick start is sufficient for normal operations. More settings
are available in the Setup menu for special installation conditions.
4.2 Programme start
Language
selection
Connection check
Country
selection
Date input
Time input
Building type
programme
Select cable type
Plumbing
settings
Approval
CE, UKCA, EMC According to EN 50081-1/2
for emission and EN 50082-1/2 for immunity
Temperature for bal pressure +100°C test (DIN
EN 60730/VDE 0631-1)
Rated impulse voltage: Overvoltage category III
(DIN EN 60730/ VDE 0631-1)
Select your language from the language
menu.
The unit is automatically executing a
connection check. It will check the heating
cable connection, boiler sensor and pipe
sensor connection.
A connection of the unit to an external
relay needs to be confirmed by the user.
Boiler sensor and pipe sensor are optional
connections. If connected, they will
automatically switch on.
Fine-tune the sensor inputs in the parameter
settings.The unit also operates in mode
without sensors.
Select a country in this menu. Your selection
will define the default values for time format,
pipe diameter and insulation thickness.
Use the up/down arrow keys to select the
year.
Use the up/down arrow keys to set
the hour and minute.
The HWAT-ECO has 7 default timer
programmes. Select a programme by tapping
on the corresponding box (box will turn red).
Select the installed HWAT heating cable.
Default values are set for selected plumbing
set values. Change the default values by
clicking on the arrow sign for each value and
enter a new value.
Select the type of cable used in your
installation (HWAT-L,HWAT-M,HWAT-R).
nVent.com/RAYCHEM
EN
|
11
Advertisement
