Advertisement
Quick Links
v20220531
Important notes before installing:
- Installing this product to your vehicle may require an adaptor. SAAS make a large range of
adaptors and installation parts, please check with your SAAS dealer for available adaptors.
- This product is designed for 12volt systems ONLY!
- All installation work should be done by a qualified professional to avoid damage to this product.
- SAAS RECOMMENDS all products be tested prior to installation. This will save time and speed up
the troubleshooting process if you encounter any issues.
- BEFORE installing, please check our website (shopsaas.com) for the latest fitting instructions.
If the top left corner (v) number is different to website, please use instructions from website.
Wire colour
Orange
Black
Yellow
Red
White
Mounting studs for U bracket.
Fitting U bracket: Fit supplied stud
spacers to threads before using the
supplied U bracket.
Connector pinout
IN-DASH SPEEDOMETER (90mm)
Installation Instructions
Wiring Guide:
Wire Function
VSS input
Ground 12V-
Illumination 12V+
Ignition 12V+
Battery 12V+
Wiring Diagram
Typical Layout
Wire Connection Location
Dash cluster/ gearbox / PCM module
Vehicle body
Park light circuit (do NOT connect to a dimmer)
Ignition harness / Fuse box
Ignition harness / Fuse box
Rear of gauge
Battery 12V+
Ignition 12V+
Illumination 12V+
Ground 12V-
Not used
VSS signal input
Part No. SG41263
Programming
switch
Page 1/4
Advertisement
Related Manuals for SAAS MUSCLE DIGITAL Series
Summary of Contents for SAAS MUSCLE DIGITAL Series
- Page 1 Part No. SG41263 Important notes before installing: - Installing this product to your vehicle may require an adaptor. SAAS make a large range of adaptors and installation parts, please check with your SAAS dealer for available adaptors. - This product is designed for 12volt systems ONLY! - All installation work should be done by a qualified professional to avoid damage to this product.
- Page 2 User Functions: Note: The programming button must be connected to the back of the gauge and mounted in a location that is easy to reach to access all functions. User Functions Ignition Press Button Hold Button Peak readings are cleared. Peak Colors Day Color (D)
- Page 3 > gauge will exit after 5 seconds of no activity. Troubleshooting: Please note: If you are having problems with the installation of this product, please do not contact your retailer or SAAS until you have read ALL the troubleshooting notes below. Problem Possible Cause...
- Page 4 Provision of this warranty shall not apply to any SAAS Automotive product that has been used for a purpose for which it is not designed, or which has been altered in any way that would be detrimental to the performance or life of the product, or misapplication, misuse, negligence or accident.