Fig. 1 such activities. For replacement and repair of the enclosure only Tranberg AS spare parts may be used. Repair that effects the explosion protection, may only be carried out by Tranberg AS, or a qualified electrician in compliance with the respective national regulation.
TEF 1060 HIGH VOLTAGE ENCLOSURE WITH A-BLOCK USER MANUAL INSTALLATION No spare parts, tools, measuring equipment or any other Connection item shall be stored inside the high voltage enclosure. The In order to maintain the mode of protection, the conductors inside of the enclosure, terminals and cables shall be clean will have to be connected with special care.
Page 4
TEF 1060 HIGH VOLTAGE ENCLOSURE WITH A-BLOCK USER MANUAL CONNECTION DATA FOR PHOENIX CONTACT UT TERMINALS Connection type: Screw connection, Connection in acc.Standard : IEC 60947-7-1 UT 2,5 UT 4 UT 6 UT Terminal type Min./ max. Solid conductor cross section 0,14 mm²...
Page 5
TEF 1060 HIGH VOLTAGE ENCLOSURE WITH A-BLOCK USER MANUAL CONNECTION DATA FOR PHOENIX CONTACT UT TERMINALS Connection type: Screw connection, Connection in acc.Standard : IEC 60947-7-1 UT 10 UT 16 UT 35 UT Terminal type Min./ max. Solid conductor cross section 0,5 mm²...
Page 6
Area of use: Zone 1, Zone 2 and safe area Tranberg AS | P.O. Box 8033 | N-4068 Stavanger | Norway | Tel.: (47)51 57 89 00 | Fax.: (47)51 57 89 50 E-mail: info@tranberg.com | www.tranberg.com Tranberg Systems | Hjulmagervej 15C | 7100 Vejle | Denmark | Tel.: (45) 75 85 83 80...
Need help?
Do you have a question about the TEF 1060 and is the answer not in the manual?
Questions and answers