Related Manuals for Milly and Coup Pixi
Summary of Contents for Milly and Coup Pixi
- Page 1 Pixi Newborn Parent Facing Pack Product Manual IMPORTANT! READ CAREFULLY AND KEEP FOR FUTURE REFERENCE...
- Page 2 22kg, although we recommend this be used from newborn to 6 months. General safety: • This newborn pack is approved for use with the Milly + Coup Pixi range only. Do not use with any other products. • Always ensure the newborn pack is securely attached before using the stroller.
-
Page 3: What's In The Box
Pixi Product Manual What’s in the box? Parts Checklist Please check that you have all the correct parts before getting started. Base Canopy UV / Sun Cover... - Page 4 Pixi Product Manual Removing the stroller seat Ensure the seat is in the fully upright position and remove the belly bar. Behind the canopy, undo the elastic loops connecting the canopy to the frame on either side of the handlebar.
- Page 5 Pixi Product Manual Removing the stroller seat You can then pull the seat fabric upwards and off the frame. Note: There is a fabric slip (A) that keeps the seat on the frame, this may get stuck as you try to lift off the seat. Simply guide it over the footrest levers to release.
- Page 6 Pixi Product Manual Attaching the newborn pack Starting with the frame in the position shown, fold the newborn pack in half ensuring the harness is facing towards the handlebar (it is a parent facing seat). Slide the fabric slip over the footrest levers and onto the metal frame.
- Page 7 Pixi Product Manual Attaching the newborn pack At the other end of the base, secure the seat connectors into the plastic connector slots on both sides of the frame. Note: Ensure you connect these into the lower of the two slots.
- Page 8 Pixi Product Manual Folding with the newborn pack Pixi can be folded with the newborn pack attached. Undo the Velcro strap from underneath that is connecting the underside of the seat to the stroller frame. Pull the entire canopy and base back up to meet the handlebar.
- Page 9 Pixi Product Manual Removing the newborn pack Press the button on the sides of the canopy connectors before pulling them out to remove the canopy. Press the button on the inside of the seat connectors and pull them out of the sockets.
- Page 10 Pixi Product Manual Re-attaching the stroller seat Start with the frame in the position shown. Click! Secure the canopy connectors into the upper connectors slots on both sides of the frame. Behind the seat, secure the elastic loops on each side of the canopy to the handlebar frame.
- Page 11 Pixi Product Manual Re-attaching the stroller seat Make sure you thread the footrest levers through the holes in the fabric. It should now look like the image shown. Next, thread each Velcro strap through the slots in the plastic attachment arms.
- Page 12 Contact Us: au.support@millyandcoup.com | nz.support@millyandcoup.com Model: Pixi Newborn Parent Facing Pack Version: 1 - March 2023 Information subject to change. Please see website for current version. millyandcoup.com...
Need help?
Do you have a question about the Pixi and is the answer not in the manual?
Questions and answers