dynarex Tub Transfer Bench Manual

Download this manual

SYMBOL GLOSSARY

For an explanation of symbols

used in Dynarex packaging, visit

dynarex.com/symbols.php

Tub Transfer

Manufactured for: Dynarex Corporation

10 Glenshaw Street • Orangeburg, NY 10962

USA • www.dynarex.com

Made in China

R191129

Reorder No. 10326

Bench

Need help?

Do you have a question about the Tub Transfer Bench and is the answer not in the manual?

Page 1 Reorder No. 10326 Tub Transfer Bench Manufactured for: Dynarex Corporation SYMBOL GLOSSARY 10 Glenshaw Street • Orangeburg, NY 10962 For an explanation of symbols USA • www.dynarex.com used in Dynarex packaging, visit dynarex.com/symbols.php Made in China R191129...
Page 2 LIMITED LIFETIME WARRANTY Your Dynarex product is warrantied to be free of defects in materials and workmanship for the lifetime of the product for the original purchaser. This item was built to exacting standards and carefully inspected prior to shipment. This...
Page 3 3. Insert the legs with the small rubber tip on the other side of 6. Insert the back rest support poles to the chair back. Ensure the chair. Depress the brass push-pin and insert the leg that the brass push-pin “snaps” through the hole. (Figure 4) into the socket until the brass push-pin “snaps”...
Page 4 ADJUSTING LEG HEIGHT ASSEMBLY INSTRUCTIONS 1. Before use, adjust height of each leg to your speciﬁc 1. Lay the chair base with the seat surfaces facing down and needs, making sure all legs are at the same height. When the leg sockets facing up. Depress the brass push pin and desired height is reached, lock legs into place by aligning slide the two seat sections together.

10326