Samsung QA65Q90RAK Service Manual page 58

3. Disassembly and Reassemble
Description & Screws
4
Place the TV face down onto a protective surface
and remove the 4 screws on the upper stand
mount from the TV.
ASSY ACCESSORY-SCREW
6003-001907
SCREW-TAPTYPE : M4 x L14, ZPC(BLK)
•
SET + STAND
5
Using Open Jig push in lightly at each bottom
locking tab to release.
Now Insert the Open Jig completely into the
bottom left corner tab then move up the left side
to release cover.
Insert Open Jig into bottom right corner tab
and continue following cover release directions
1→2→3.
Open Jigs
Locking tabs locations
Gently lift up the Rear Cover beginning at the
top to release all mounting clips as indicated by
Red Rectangles.
NOTE
• Some tabs may break. OK to continue to
use cover.
3-2
BN81-14946B
Picture Description
Jig Direction
3